Cables for aerial installation (ADSS)

All-Dielectric Self-Supporting (ADSS) cables are designed for overhead pole installation. But can also be Installed underground in ducts by pulling or blowing. Cable parameters such as cable diameter, stiffness and tensile strength are optimized for best installation performance. Available in different designs depending on span length, accepted sag and expected ice and wind load.

The expected service life in normal use exceeds 30 years.

ADSS CLT 70m span

3 variants

Cables designed for a maximum of 70m span lengths (distance between poles) under ice and wind conditions according to NESC heavy. The cable is based on a central loose tube construction (CLT). Two strain reliefs made of fiberglass-reinforced plastic (FRP) are embedded in the cable sheath for best tensile strength performance.

ADSS MLT 70m span

3 variants

Cables designed for a maximum of 150m span lengths (distance between poles) under ice and wind conditions according to NESC heavy. The cable is based on a multi loose tube construction with SZ design around a central strength member of fiberglass-reinforced plastic (FRP) which facilitates mid-span access.

ADSS MLT 150m span

3 variants

Cables designed for a maximum of 150m span lengths (distance between poles) under ice and wind conditions according to NESC heavy. The cable is based on a multi loose tube construction with SZ design around a central strength member of fiberglass-reinforced plastic (FRP) which facilitates mid-span access.

Suspension clamp DSAL for ADSS cable with OD 8.5-10.0mm

0644068
3 variants

Suspension clamp DSAL for ADSS cable with OD 10.0-11.5mm

0644069
3 variants

Suspension clamp DSAL for ADSS cable with OD 11.5-13.0mm

0644070
3 variants

Suspension clamp DSAL for ADSS cable with OD 13.0-14.5mm

0644071
3 variants

Suspension clamp DSAL for ADSS cable with OD 14.5-16.0mm

0644072
3 variants

Suspension clamp DSAL for ADSS cable with OD 16.0-17.5mm

0644073
3 variants

Suspension clamp DSAL for ADSS cable with OD 17.5-19.0mm

0644074
3 variants

Suspension clamp DSAL for ADSS cable with OD 19.0-21.2mm

0644075
3 variants

Suspension GSFO-11,35/12,30 With the thimble assembled

87114002
3 variants

Suspension GSFO-12,31/13,30 With the thimble assembled

87114003
3 variants

Suspension GSFO-13,31/14,35 With the thimble assembled

87114004
3 variants

Suspension GSFO-14.36/15.50 With the thimble assembled

87114005
3 variants

Suspension GSFO-15,51/16,60 With the thimble assembled

87114006
3 variants

Suspension GSFO-6,65/7,35 With the thimble assembled

87114007
3 variants

Suspension GSFO-7.60/8.27 With the thimble assembled

87114008
3 variants

Suspensionset GSFO-18,91/20,25 With the thimble assembled

87114009
3 variants

Tension set GRFO-11,35/12,30 With the thimble assembled

87114012
3 variants