Fibre Termination Boxes outdoor

Termination boxes for fiber optic installations in outdoor environments. Designed for all types of cables and microducts. Wall mounted and may be used as distribution points in fiber networks, splice only or splice and patch. Could be customized with pre-installed accessories according to customers specific needs.

MDB-M optical distribution box IP65

3 variants

The Fiber Optic Box MDB M is a durable fiber optic box, designed with the highly flexible FibeRoad system inside. The box can be configured to address a wide range of fiber optic splice and/or connectivity applications for PON, GPON and 5G networks. The engineered design provides IP65 protection from water / dust ingress and IK10 impact resistance to keep your critical network connections safe inside. The MDB M provides the ideal splicing solution for multi dwelling unit fiber distribution points or outdoor pole mounted splice applications. Capacity of up to 144 splices Capacity of up to 48× SC / 96× LC connector Multiple cable or tube entry ports on all sides of the box to increase installation flexibility Top outputs – PG grommets for using outdoors Grommets System for using indoors Ability to mix & match the Fiber Optic Trays: KM 4, KM 5, KM 6, KM 7, KM 9 KM 4 and KM 6 for up to 24 splices (6 pcs max.) KM 5 for up to 12× SC / 24× LC connector (4 pcs max.) KM 7 for up to 8× SC / 16× LC connector (for GPON, 4 pcs max.) KM 9 for up to 12 splices (12 pcs max.) Scalable through gradual adding of trays Optional placing of PLC Splitters in the management (outside a tray) Up to 2 PLC Splitters ABS together with 4× KM 7 Hingeable (or detachable) splicing (or patching) section  FibeRoadTM System compatible Removable internal fiber management chassis to enable maximum access Support for ribbon fibers Significant space for patch cords and cables reserves Optional pole bracket Suitable for all types of networks

ORM5 distribution lockable box IP54

5060074

Lockable wall mount optical distribution box is designated for indoor/outdoorwall installation at the customer premises. Box is suitable mainly in FTTH networkto terminate optical fibres on the internal/outdoor walls of the buildings mainly insuburban areas with lower household density (family houses, low household countresidential buildings or offices). Additionally, the box can play the role of the floor distribution box in multidwelling units. Simple wall installation Easy access due to hinged removable cover Lockable cover (optional) Gradual cable gland located in the lower wall for the cables with the outside diameters between 3 and 14 mm Gradual cable gland located in the bottom for the cables with the outside diameters between 3 and 10 mm (for the wall through installations) Pre-fabricated holes in the bottom for the wall through patchcord installation 4 prefabricted holes for dividable bushing capable to seal up to 2 patchcords or heavy duty subscriber cables Can accommodate up to 4× SC or 4× E2000, eventually 8× LC connectors and pigtails (UPC or APC polishing) Splice cassette supporting up to 12 heat-shrink or crimp fusion splice protective sleeves or mechanical splices (up to 4 pieces). Ready to accommodate Gas block for the microtubes with various outside diameters (5, 7, 10, 12 and 14 mm) at the input of the box   Coverage Degree IP 54 according to EN 60529 Impact protection degree IK 10 to EN 50102 Color Light gray RAL 7035 Material PC+ABS CYCOLOY C2950-96235 Dimensions 235 × 156 × 45 mm Weight 450 g Bushings – right part 1× Gradual bushing 3–14 mm for incoming cable Bushings – left part 4× Dividable rubber bushing 2× 1–3 mm or 4× Gradual bushing 3–14 mm Bushings – bottom (wall through) Gradual bushing 3–10 mm for incoming cable Solar radiation (UV) EN 60068-2-5 Change of temperature -45 °C/+70 °C according to EN 60068-2-14 Environment Outdoor Number of splices 1-12 splices Number of connectors 1-12 connectors Connector type SC, LC