Optical Distribution Frames (ODF)

Optical Distribution Frames (ODFs) are used for terminating fiber optic cables. Usually mounted in 19´ racks or cabinets. Available in different types and designs depending on the number of fibers to be instelled and requirements on design and safety. Could be customized with pre-installed accessories according to customers specific needs.

Fibre Management kit

5055018

Fibre management kit is an essential item which ensures that fiber is maintained in the correct way in ODFs. Includes: 1 x PG16 Cable Gland and Locknut, 8 x Bunny Clips, 1 x Splice Protectors Bridge and warning sticker.

Comb 24x7mm for blownfiber ODF including sticker 24x 7mm

5057748

ODF 19 1U 24xSCD blownfiber Comb for 48 5mm microducts

5057749

The draw-out-type ABF ODF (optical distribution frame) is designed for the placement of up to 48 optical SC connectors or 96 LC connectors and 48 microtubes indoors. Divided into two sections, one section handles the microtubes and the other handles fibre and termination. The solution provides full access from the front for easy installation and future expansions. Design: For air blown fiber (APF) installation Capacity fibre: Up to 48 SC or 96 LC optical connectors (24 SCD or 48 LCQ adaptors) Capacity microtubes: Up to 48 microtubes 5 mm Needle holder for optical splice trays Installation into a 19" base Height: 1U Depth: 290 mm Material: Black metal Option: Tube clamp 24 microtubes 7 mm (ordered separately)

ODF 19" 1U 24xSCD sliding Black, D210mm

5057751

The draw-out-type ODF (optical distribution frame) is designed for the placement of up to 48 optical SC connectors indoors. The design of the patch panel enables to install it into a 19” rack. The ODF is equipped with needle holder for optical splice trays and strain reliefs for the cable FRP. Prepared for cable mounting at the rear (PG bushings). Capacity: Up to 48 optical SC connectors (24 duplex SC adaptors) Needle holder for optical splice trays Possibility to fit it with PG bushings Installation into a 19" base Height: 1U Depth: 210 mm Material: Black metal Option: Microduct shelf for microtube 5 mm management (ordered separately)   

ODF 19 2U 48xSCD sliding Black, D230mm

5057753

The draw-out-type ODF (optical distribution frame) is designed for the placement of up to 96 optical SC connectors indoors. The design of the patch panel enables to install it into a 19” rack. The ODF is equipped with needle holder for optical splice trays and strain reliefs for the cable FRP. Prepared for cable mounting at the rear (PG bushings). Capacity: Up to 96 optical SC connectors (48 duplex SC adaptors) Needle holder for optical splice trays Possibility to fit it with PG bushings Installation into a 19" base Height: 2U Depth: 230 mm Material: Black metal Option: Microduct shelf for microtube 5 mm management (ordered separately) 

ODF 19 3U 72xSCD sliding Black, D230mm

5057755

The draw-out-type ODF (optical distribution frame) is designed for the placement of up to 144 optical SC connectors indoors. The design of the patch panel enables to install it into a 19” rack. The ODF is equipped with needle holder for optical splice trays and strain reliefs for the cable FRP. Prepared for cable mounting at the rear (PG bushings). Capacity: Up to 144 optical SC connectors (72 duplex SC adaptors) Needle holder for optical splice trays Possibility to fit it with PG bushings Installation into a 19" base Height: 3U Depth: 230 mm Material: Black metal

ODF 19 4U 96xSCD sliding Black, D230mm

5057757

The draw-out-type ODF (optical distribution frame) is designed for the placement of up to 192 optical SC connectors indoors. The design of the patch panel enables to install it into a 19” rack. The ODF is equipped with needle holder for optical splice trays and strain reliefs for the cable FRP. Prepared for cable mounting at the rear (PG bushings). Capacity: Up to 192 optical SC connectors (96 duplex SC adaptors) Needle holder for optical splice trays Possibility to fit it with PG bushings Installation into a 19" base Height: 4U Depth: 230 mm Material: Black metal

Microduct shelf

5057759

Shelf for fixing 36 microtubes 5 mm. The shelf could be mounted on the back plate of ours ODFs with P/N 5057751 and 5057753 giving a smart solution for air blown fibre installations. Depth 140mm.