Lubricants for Blowing and Pulling
Cable lubricants is designed to make it easier to blow and pull cables through pipes and microducts. It reduces the amount of friction between cables and ducts to help minimize damage and make blowing and pulling smoother, safer, and faster.
PreLube 5000 240ml Microcable Blowing Lubricant
Reduces frictional drag during the blowing of small diameter fiber optic microcable into microtube duct. It increases installation distance of cable in a single shot. The improved chemistry allows this product to spread farther and reduce friction at extremely low coating levels. Can be used with all microcable jackets. Spread lubricant into microduct by blowing a foam carrier or sponge as many times as necessary to avoid lubricant puddling near the entrance of the duct.
PreLube 2000 0,95L
Reduces frictional drag during the blowing of outside plant fiber optic cable into duct. It increases the distance cable can be installed in a continuous length. Prelube 2000 can also be used to blow in empty microducts for future microcable installation. The friction reduction shown for Prelube 2000 can increase installation distance by a factor of 5 or more versus unlubricated duct.
PreLube 2000 3,8L
Reduces frictional drag during the blowing of outside plant fiber optic cable into duct. It increases the distance cable can be installed in a continuous length. Prelube 2000 can also be used to blow in empty microducts for future microcable installation. The friction reduction shown for Prelube 2000 can increase installation distance by a factor of 5 or more versus unlubricated duct.
PreLube 2000 Wintergrade 0,95L
Reduces frictional drag during the blowing of outside plant fiber optic cable into duct. It increases the distance cable can be installed in a continuous length. Prelube 2000 can also be used to blow in empty microducts for future microcable installation. The friction reduction shown for Prelube 2000 can increase installation distance by a factor of 5 or more versus unlubricated duct. Winter version for cold weather use in temperatures as low as -30°C.
PreLube 2000 Wintergrade 3,8L
Reduces frictional drag during the blowing of outside plant fiber optic cable into duct. It increases the distance cable can be installed in a continuous length. Prelube 2000 can also be used to blow in empty microducts for future microcable installation. The friction reduction shown for Prelube 2000 can increase installation distance by a factor of 5 or more versus unlubricated duct. Winter version for cold weather use in temperatures as low as -30°C.
Lubricant F 0,95L
A high-performance, pourable liquid recommended for pulling underground fiber optic cable. It is also suitable for pulling coaxial and copper-pair cable. A thick liquid, and is applied by pouring or pumping the lubricant into the duct system. Wets and clings to cable jacket and evenly coats the jacket surface. It continues to lubricate by leaving film after its water base has evaporated. It is compatible with a broad range of cable jackets, including polyethylene (PE) types.
Lubricant F 3,8L
A high-performance, pourable liquid recommended for pulling underground fiber optic cable. It is also suitable for pulling coaxial and copper-pair cable. A thick liquid, and is applied by pouring or pumping the lubricant into the duct system. Wets and clings to cable jacket and evenly coats the jacket surface. It continues to lubricate by leaving film after its water base has evaporated. It is compatible with a broad range of cable jackets, including polyethylene (PE) types.
Lubricant F Wintergrade 3,8L
A high-performance, pourable liquid recommended for pulling underground fiber optic cable. It is also suitable for pulling coaxial and copper-pair cable. A thick liquid, and is applied by pouring or pumping the lubricant into the duct system. Wets and clings to cable jacket and evenly coats the jacket surface. It continues to lubricate by leaving film after its water base has evaporated. It is compatible with a broad range of cable jackets, including polyethylene (PE) types. Winter version for cold weather use in temperatures as low as -30°C.
Lubricant wipes FTTx, 20 pcs
Reduces friction with ultra-thin coating levels. Contains lubricant-saturated towels that easily coat the cables as they are pulled. Dries quickly and leaves zero mess at end of receiving side of the pull, unlike traditional wax and gel pulling lubricants. Suitable for a variety of cable jacket types.
Lubricant spray FTTx 0,95L
Reduces friction with ultra-thin coating levels. Spray trigger bottle practical for shorter cable installations inddor. Dries quickly and leaves zero mess at end of receiving side of the pull, unlike traditional wax and gel pulling lubricants. Suitable for a variety of cable jacket types.